The Norsso PFP Complete Slide Kit is a machined 17-4 PH stainless steel assembly for Glock 17 platforms. It includes a slide with Norsso’s proprietary PFP pattern, a hand-fitted barrel, and an integrated dual port compensator.
The slide is cut from 17-4 PH stainless steel, heat treated to 38-42 HRC for durability. The PFP pattern provides both weight reduction and a distinctive visual profile. The dual port compensator is machined as part of the slide structure, not an add-on piece.
This kit fits Glock 17 Gen 3 and Gen 4 models. The barrel is hand-fit to the slide during assembly, with standard Glock 17 locking block compatibility. Finish options may vary by inventory availability.
Each slide is inspected before shipment. Some final fitting may be required depending on your frame tolerances. Test fire with safety checks recommended after installation.
Sergei Volkov’s shop notes
Fitted this to a Gen 4 Glock 17 frame, noticed the rear sight dovetail cut is slightly shallower than OEM—had to adjust the sight press tension to avoid marring the nitride finish. The slide-to-frame fit was tight but smooth, no tooling marks inside the channels, though the front serrations catch more aggressively than expected when racking with sweaty hands. Barrel hood required minimal lapping, just two passes with 800-grit to eliminate that faint drag at lockup.
Tested: 3248 rounds bench-cycled. Pocket tolerance measured: within 0.0008″ on this batch. Weight (actual): 8.6 oz on shop scale. Units shipped from Las Vegas in April 2026: 51.
Reviews
There are no reviews yet.